WyreStorm EX-70-H2 Extender 70m 4K 18Gbps HDR HDBaeT HDCP 2.2 and 2-way PoH

Part of the latest generation of WyreStorm 4K extenders for the latest generation of 4K HDR content, the EX-70-H2 features dynamic compression technology to enable high frame rate HDR-10 and HLG content to be transmitted over standard 10Gbps HDBaseT, both visually losslessly and without latency.

HDMI 2.0 MAXED OUT

Knowing the speed at which technology moves, at WyreStorm we’re always looking ahead. That’s why we’ve implemented our VLC chipset (Visualy Lossless Compression) into this model meaning it’s ready for the next shift in content technology: 4K 60Hz 4:4:4 HDR.

HDCP 2.2 COMPLIANT

The latest 4K UHD content arriving via satellite, cable, disc or stream is all heavily encrypted. Being part of the H2 product family, the EX-70-H2 supports the multi-point distribution of this content over HDBaseT.

SIGNAL RE-CLOCKING

Installers shouldn’t experience problems because of source equipment they have no control over. That’s why all extenders in the WyreStorm H2 family automatically “re-clock” the source signal, overcoming clock-stretching issues found in certain source devices.

FLEXIBLE INSTALLS WITH 2-WAY POH

No 2 installs are the same; that’s why we’ve enabled all of the H2 extender line up to be powered from either the TX or RX, meaning maximum flexibility on-site without hunting for a mains outlet.

Technical Specifications

AUDIO & VIDEO

• Inputs

TRANSMITTER

1x HDMI: 19-pin type A

• RECEIVER

1x HDBaseT 8-pin RJ-45 female

• Outputs

TRANSMITTER: 1x HDBT: 8-pin RJ-45 Female

RECEIVER: 1x HDMI Loop: 19-pin type A

• Output Video Encoding: HDBaseT™ Class A

• Encoding Data Rate: 9.2Gbps

• End to End Latency: 10μs (microseconds)

• Audio Formats: 2ch PCM | Multichannel up to DTS-X and Dolby Atmos

• Video Resolutions (max): 1920x1080p @60Hz 16bit / 3840x2160p @60Hz 10bit 4:2:0 HDR / 4096x2160p @60Hz 8bit 4:4:4

• Supported Standards: DCI | RGB | Dolby Vision @ 30Hz | HLG | HDR-10

• Maximum Pixel Clock: HDMI: 600MHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL

• HDMI: HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)

• HDBaseT: HDMI | HDCP 2.2 | EDID | 2-way PoH | Bidirectional IR, RS-232, and Ethernet

• CEC: CEC Pass-through – Requires CEC compatibility between source and display

• IR: 1x IR TX: 3.5mm (1/8in) TS Mono / 1x IR RX: 3.5mm (1/8in) TRS Stereo

• RS-232: 1x RS-232: 3-pin Terminal Block

• Ethernet: 1x Ethernet: 8-pin RJ-45 Female

POWER

• Power Supply: 18V DC 1A

• PoH: IEEE 802.3af 48V 15.4W Max | 2-way

• Max Power Consumption:4.68W

Additional Features

• HDBaseT™ Class B transmission of 4K HDR up to 35m/115ft and 1080p @60Hz 36bit up to 70m/230ft

• Full UHD 4K transmission supporting HDMI 2.0 video standards

• Transmits discreet wide-band bidirectional IR/RS-232 control signals together with HDMI over a single Cat5e/6 cable

• Low profile chassis of 15mm for easier, more convenient installations behind screens at display zones

• Supports 2ch PCM and 7.1 multichannel audio up to DTS-X and Dolby Atmos

• Switchable RS-232 function mode on transmitter and receiver for firmware update

• Threaded bushings allow use of both standard and locking DC power plugs

• Visual LED indication for power, display connection signal status, HDBaseT™ link, and HDCP presence in signal

• Cable termination follows IEEE-568B standards

• Automatically adjusts feedback, equalization and amplification of signal for easy installation

• Energy efficient universal power supply included